Showing 1–12 of 20 results
-
TXMC375
Conduction Cooled XMC with 8 Channel RS232/RS422/RS485 Programmable Serial Interface
VIEW FULL SPECIFICATIONS- Conduction cooled XMC module
- 8 channels with programmable RS232 / RS422 / RS485 interfaces
- High performance asynchronous serial interface (up to 10 Mbps)
- Hardware handshake support available
- Half-duplex mode available
- 256 byte FIFO
- P14 I/O or P16 I/O
-
TXMC376
Conduction Cooled XMC with 4 Channel RS232/RS422/RS485 Programmable Serial Interface
VIEW FULL SPECIFICATIONS- Conduction cooled XMC module
- 4 channels with programmable RS232 / RS422 / RS485 interfaces
- High performance asynchronous serial interface (up to 10 Mbps)
- Hardware handshake support available
- Half-duplex mode available
- 256 byte FIFO
- P14 I/O or P16 I/O
-
TXMC395
Conduction Cooled, 4 Channel 1000BASE-T Ethernet
VIEW FULL SPECIFICATIONS- Conduction Cooled single-width XMC module
- 4 channel 1000BASE-T / 100BASE-TX / 10BASE-T
- IPMI resource: FRU hardware definition information stored in on-board EEPROM
- PXE and iSCSI boot (16 Mbit serial flash)
- IEEE 1588/802.1AS Precision Time Protocol (PTP) and IEEE 802.1Qav Audio/Video Bridging (AVB) traffic shaping
- Rear I/O via P16 - 2 channels mapped in X12d range and 2 channels mapped in X8d range (VITA46.9)
-
TXMC397
Conduction Cooled, 2 Channel 10GBASE-T Ethernet
VIEW FULL SPECIFICATIONS- Conduction Cooled single-width XMC module
- 2 channel 10GBASE-T / NBASE-T / 1000BASE-T / 100BASE-TX
- IPMI resource: FRU hardware definition information stored in on-board EEPROM
- PXE and iSCSI boot (64 Mbit serial flash)
- IEEE 1588/802.1AS Precision Time Protocol (PTP)
- Rear I/O via P16 – Both channels mapped in X12d range or both channels mapped in X8d range (VITA46.9)
-
TXMC463
4 Channel RS232/RS422 Serial Interface (RJ45)
VIEW FULL SPECIFICATIONS- Standard XMC module
- 4 channels RS232 and/or RS422 interfaces
- High performance asynchronous serial interface (up to 15.625 Mbps)
- Hardware handshake and full modem support available
- 256 byte FIFO
- Front panel (4 RJ45 connectors)
-
TXMC465
8 Channel RS232/RS422/RS485 Programmable Serial Interface
VIEW FULL SPECIFICATIONS- Standard XMC module
- 8 channels with programmable RS232 / RS422 / RS485 interfaces
- High performance asynchronous serial interface (up to 10 Mbps)
- Hardware handshake support available
- Half-duplex mode available
- 256 byte FIFO
- Front panel I/O (HD50 SCSI-2 type connector)
- Optional P14 I/O or P16 I/O
-
TXMC590
16 Channel Thermo-/Strain-Measurement XMC
VIEW FULL SPECIFICATIONS- Standard Single width XMC module
- 16 independent measurement channels
- Differential analog input
- Differential sensor excitation output
- Each channel is seperately configurable
- Supports thermocouple measurements
- Supported cold junction temperature sensors
- A second channel
- An onboard I2C temperature sensor
- An external I2C temperature sensor
- Supports measurement by resistive sensors and thermistors
- Supports strain gauges
- Quarter-, half- and full bridges are supported
- Front panel I/O (3M Mini D Ribbon connector, 68 pol.)
-
TXMC637
Reconfigurable FPGA with 16x Analog Input 8x Analog Output and 32x Digital I/O
VIEW FULL SPECIFICATIONS- Standard XMC Module
- User configurable FPGA (AMD Artix™ 7)
- DDR3 SDRAM bank, 256M x 16 bit (512 MB)
- 32 channels 16 bit ADC
- Offering single-ended and differential mode
- Programmable input voltage
- Conversion time: up to 1.1 µs
- Sampling rate up to 1 Msps
- 8 channels single-ended analog output
- 16 bit resolution
- Programmable output voltage: ±10 V, ±5.0 V or ±2.5 V
- Full scale settling time: typ.1 µs
- 32 digital TTL compatible I/O lines
- 16 lines optional configurable as differential RS422 interface
- P14/P16 Rear I/O lines
- 64 single ended or 32 differential rear I/O lines on a rear XMC 64 pin P14 connector
- 4 FPGA Multi-Gigabit-Transceiver on a rear XMC P16 connector
-
TXMC638
Reconfigurable FPGA with Analog Input
VIEW FULL SPECIFICATIONS- Standard XMC module
- User configurable FPGA (AMD Kintex™ 7)
- 1 Gbyte, 32 bit wide DDR3 SDRAM
- 24 channels 16 bit ADC
- Offering single-ended and differential mode
- single-ended voltage input ranges (±2.5 V)
- differential voltage input ranges (±5 V)
- Sampling rate up to 5 Msps
- Digital rear I/O
- 64 single ended digital I/O lines (LVCMOS25) or 32 differential digital I/O lines (LVDS25)
- Front panel I/O (Rugged EdgeRate connector) and rear I/O via P14 and P16
-
TXMC639
Reconfigurable FPGA with 16x Analog Input 8x Analog Output and 32x Digital I/O
VIEW FULL SPECIFICATIONS- Standard XMC Module
- User configurable FPGA (AMD Kintex™ 7)
- DDR3 SDRAM bank, 256M x 32 bit (1 GB)
- Up to 16 channels differential analog input
- 16 bit resolution
- Programmable input voltage
- Sampling rate up to 1.5 Msps
- Up to 8 channels single-ended analog output
- 16 bit resolution
- Programmable output voltage: ±10 V, ±5.0 V or ±2.5 V
- Full scale settling time: typ.1 µs
- 32 digital TTL compatible I/O lines
- 16 lines optional configurable as differential RS422 interface
- P14/P16 Rear I/O lines
- 64 single ended or 32 differential rear I/O lines on a rear XMC 64 pin P14 connector
- 4 FPGA Multi-Gigabit-Transceiver on a rear XMC P16 connector
-
TXMC889
4 Channel SFP Gigabit Ethernet
VIEW FULL SPECIFICATIONS- Short single-width XMC module
- 4 channel SFP Gigabit
- IPMI resource: FRU hardware definition information stored in on-board EEPROM
- PXE and iSCSI boot (1 Mbit serial flash)
- Configuration data (128 Kbit EEPROM)
- IEEE 1588/802.1AS Precision Time Protocol (PTP) and IEEE 802.1Q VLAN
- Front panel I/O (4 SFP connectors)
-
TXMC895
4 Channel 1000BASE-T Ethernet
VIEW FULL SPECIFICATIONS- Short single-width XMC module
- 4 channel 1000BASE-T / 100BASE-TX / 10BASE-T
- IPMI resource: FRU hardware definition information stored in on-board EEPROM
- PXE and iSCSI boot (16 Mbit serial flash)
- IEEE 1588/802.1AS Precision Time Protocol (PTP) and IEEE 802.1Qav Audio/Video Bridging (AVB) traffic shaping
- Front I/O via 4 RJ45 connectors
