Showing 1–12 of 58 results
-
TPMC117
6 Channel SSI, Incremental Encoder, Counter Interface
- Standard single-width 32 bit PMC module
- 6 independent channels operating as
- SSI interface or SSI listen only
- Programable clock rate (1 μs ... 15 μs)
- Word length (1 bit ... 32 bit)
- Encode support in binary and gray code (odd, even and no parity)
- 32 bit incremental encoder interface
- Up / down counter
- Preload function (manually or by input)
- Single, double or quadruple analysis of encoder signals
- 32 bit general purpose counter
- Up / down counter
- Preload function
- Internal clock or external signal controlled
- SSI interface or SSI listen only
- All data input are isolated
- Input signal can be RS422 or TTL
- 1 isolated digital input per channel
- IEC 61131-2 compliant
- 24V input
- Input event detection
- Multiple channel (latched) read
- Front panel I/O (HD68 SCSI-3 type connector) or P14 I/O
-
TPMC151
4 Channel Resolver/LVDT-to-Digital Converter
- Standard single-width 32 bit PMC module
- 4 channels Resolver or LVDT/RVDT-to-digital converter, option for 2 synchro channels available
- 16 bit resolution
- 0-12 VRMS programmable input
- 0-12 VRMS, 1-20 kHz programmable excitation
- Tracking rate up to ¼ excitation frequency
- Angle and velocity output
- Front panel I/O (50-pin MDR type connector)
-
TPMC160
Automotive Sensor Simulator
- Standard single-width 32 bit PMC module
- 8 automotive sensor simulation channels
- Supported modes are
- PSI5
- Wheel-Speed
- Square Wave
- PWM
- AK / VDA
- a flexible custom protocol mode
- Channels are individually programmable
- Current sinks support 3 adjustable levels.
- PSI5 transmission rates 125 kbps and 189 kbps
- all channels are isolated against system and each other
- Front panel I/O (HD50 SCSI-2 type connector)
-
TPMC310
Conduction Cooled PMC with isolated 2 x CAN Bus
- Conduction cooled single-width 32 bit PMC module
- 2 independent isolated CAN bus channels
- CAN specification 2.0B supported
- On board termination option (solder pads)
- P14 I/O
-
TPMC317
Conduction Cooled 6 Channel SSI, Incremental Encoder, Counter
- Conduction cooled single-width 32 bit PMC module
- 6 independent channels operating as
- SSI interface
- 32 bit incremental encoder interface
- 32 bit gneral purpose counter
- All data inputs are isolated
- Input signal can be RS422 or TTL
- 1 additional isolated digital input per channel (IEC 61131-2 compliant)
- Multiple channel (latched) read
- PMC P14 rear I/O
-
TPMC321
Conduction cooled 64 Digital TTL I/O / 32 Differential I/O
- Conduction cooled single-width 32 bit PMC module
- 64 Bit I/O - TTL signaling voltage level or 32 Differential Bit I/O - EIA-485 or 32 Differential Bit I/O - M-LVDS
- ESD protection
- Rear-IO via P14
- Individually programmable I/O lines (direction, pullup/pulldown)
- Input events can generated interrupts individually for each channel
-
TPMC363
Conduction Cooled PMC with 4 Channel High Speed Synch/Asynch Serial Interface
- Conduction cooled single-width 32 bit PMC module
- 4 channels high speed serial data communication
- A wide range of I/O interfaces individually programmable for each channel
- Several communication protocols
- asynchronous (with oversampling)
- isochronous
- HDLC
- 512 longword FIFO (512 x 32 bit) per channel
- DMA support
- Different signal encodings (NRZ, NRZI, FM0, FM1 and Manchester)
- Multiple clock sources (for a wide bitrate spectrum)
- Rear I/O via P14
-
TPMC371
Conduction Cooled PMC, 8 Channel RS232/RS422 Serial Interface
$1.00- Conduction cooled single-width 32 bit PMC module
- 8 channels RS232 and/or RS422 interfaces
- High performance asynchronous serial interface (up to 5.5296 Mbps)
- Hardware handshake and full modem support available
- 64 byte FIFO
- P14 I/O
-
TPMC372
Conduction Cooled PMC with 4 Channel RS232/RS422 Serial Interface
- Conduction cooled single-width 32 bit PMC module
- 4 channels RS232 and/or RS422 interfaces
- High performance asynchronous serial interface (up to 5.5296 Mbps)
- Hardware handshake and full modem support available
- 64 byte FIFO
- P14 I/O
-
TPMC375
Conduction Cooled PMC with 8 Channel RS232/RS422/RS485 Programmable Serial Interface
- Conduction cooled single-width 32 bit PMC module
- 8 channels with programmable RS232 / RS422 / RS485 interfaces
- High performance asynchronous serial interface (up to 5.5296 Mbps)
- Hardware handshake support available
- Half-duplex mode available
- 64 byte FIFO
- P14 I/O
-
TPMC376
Conduction Cooled PMC with 4 Channel Programmable RS232/RS422/RS485 Serial Interface
- Conduction cooled single-width 32 bit PMC module
- 4 channels with programmable RS232 / RS422 / RS485 interfaces
- High performance asynchronous serial interface (up to 5.5296 Mbps)
- Hardware handshake support available
- Half-duplex mode available
- 64 byte FIFO
- P14 I/O
-
TPMC377
Conduction Cooled PMC, 4 Channel Isolated RS232/RS422/RS485 Programmable Serial Interface
- Conduction cooled single-width 32 bit PMC module
- 4 channels with programmable RS232 / RS422 / RS485 interfaces
- channels are isolated from system and against each other
- High performance asynchronous serial interface (up to 5.5296 Mbps)
- Hardware handshake support available
- Half-duplex mode available
- 64 byte FIFO
- P14 I/O