Showing 73–84 of 276 results
-
TMPE633
Reconfigurable FPGA with Digital I/O PCIe Mini Card
VIEW FULL SPECIFICATIONS- Standard PCI Express Mini Card
- User programmable FPGA (AMD Spartan ™ 6)
- 26 TTL lines (5 V-tolerant) or 13 differential I/O lines (EIA-422 / EIA-485 compatible) or 13 differential Multipoint-LVDS lines
- ESD-protected I/O lines
- Each I/O line is individually configurable (e.g. direction)
- 3 state TTL output (high, low, and tristate)
- 3 TTL pull voltages (GND, 3.3 V, and 5 V)
- Onboard termination for differential I/O lines
-
TPCE260
PCI Express PMC Carrier
VIEW FULL SPECIFICATIONS- Standard height PCI Express Revision 1.1 compatible module
- Cost effective solution to provide I/O in PCIexpress environment
- Flexible I/O (TEWS offers a wide range of I/O PMCs)
- PCIexpress x1 link
- Supports one single-width 32 bit PMC
- 33 MHz / 66 MHz PCI frequency (PMC site)
- Provides access to the PMC front
- Provides rear I/O (P14) through a VME P2 style connector
-
TPCE261
PCI Express x1 PMC Carrier
$1.00VIEW FULL SPECIFICATIONS- Standard height PCI Express Revision 2.0 compatible module
- Cost effective solution to provide I/O in PCIexpress environment
- Flexible I/O (TEWS offers a wide range of I/O PMCs)
- PCIexpress x1 link with 2.5 GT/s
- Supports one single-width 32 bit PMC
- 33 MHz / 66 MHz PCI frequency (PMC site)
- Provides access to the PMC front panel I/O
- Provides rear I/O (P14) through a 68 pin ERNI SMC 1.27 mm flat cable connector
-
TPCE275
PCI Express x1, Gen 1 XMC Carrier
VIEW FULL SPECIFICATIONS- Standard height PCI Express Revision 1.1 compatible module
- Cost effective solution to provide I/O in PCI Express environment
- Flexible I/O (TEWS offers a wide range of I/O XMCs)
- Supports 1 single-width XMC
- Provides front panel I/O
- Provides XMC P14 rear I/O through VME P2 connector
- Provides XMC P16 rear I/O through two 50-pin flat cable connectors
- PCI Express x1 from host board to XMC
- PCIe Redriver allows safe operation of XMC module in distributed PCIe systems
-
TPCE277
PCI Express x1, Gen3 XMC Carrier
VIEW FULL SPECIFICATIONS- Standard height PCI Express Revision 3.0 compatible module
- Cost effective solution to provide I/O in PCI Express environment
- Flexible I/O (TEWS offers a wide range of I/O XMCs)
- Supports 1 single-width XMC
- Provides front panel I/O
- PCI Express x1 from host board to XMC
- PCIe Gen3 Redriver allows safe operation of XMC module in distributed PCIe systems
-
TPCE278
PCI Express x4, Gen3 XMC Carrier
VIEW FULL SPECIFICATIONS- Standard height PCI Express Revision 3.0 compatible module
- Cost effective solution to provide I/O in PCI Express environment
- Flexible I/O (TEWS offers a wide range of I/O XMCs)
- Supports 1 single-width XMC
- Provides front panel I/O
- Provides XMC P14 rear I/O through Tyco AMPMODU System 50 0.050x0.100 flat ribbon cable connector
- Provides XMC P16 rear I/O through two Samtec QTH-DP 0.50mm Q Pairs High Speed Ground Plane Socket Strip, Differential Pair connector
- PCI Express x4 from host board to XMC
- PCIe Gen3 Redriver allows safe operation of XMC module in distributed PCIe systems
-
TPCE280
PCI Express x8, Gen3 XMC Carrier
VIEW FULL SPECIFICATIONS- Standard height, half length PCI Express Revision 3.0 compatible module
- Cost effective solution to provide I/O in PCI Express environment
- Flexible I/O (TEWS offers a wide range of I/O XMCs)
- Supports 1 single-width XMC
- Provides front panel I/O
- Provides XMC P14 rear I/O through 68-pin ERNI SMC, right angle male, 1.27mm pitch connector
- Provides XMC P16 rear I/O through two Samtec Firefly UCC8 and UEC5 connectors
- PCI Express x8 from host board to XMC
- PCIe Gen3 Redriver allows safe operation of XMC module in distributed PCIe systems
- Provides a fan mounted under the XMC slot that helps cooling the system
-
TPCE636
Reconfigurable FPGA with 16x Analog Input and 16x Analog Output
VIEW FULL SPECIFICATIONS- Standard height, half-length PCI Express 2.1 compliant module
- Supports PCI Express x4 link
- User configurable FPGA (AMD Kintex™ 7)
- 1 Gbyte, 32 bit wide DDR3 SDRAM
- 64 FPGA I/O lines on back I/O connector
- 64 single ended LVCMOS25 or 32 differential LVDS25 interface.
- 16 channels 16 bit ADC
- Differential interface
- Input range ±20 V
- Sampling rate up to 5 Msps
- 16 channels 16 bit DAC
- Output range ±10 V
- Front panel I/O via Samtec ERF8-049 Rugged EdgeRate connector
-
TPCE863
4 Channel High Speed Synch/Asynch Serial Interface
VIEW FULL SPECIFICATIONS- Standard height, half-length PCI Express 1.1 compliant module
- 4 high speed serial data communication channels
- A wide range of I/O interfaces individually programmable for each channel
- Several communication protocols
- asynchronous (with oversampling)
- isochronous
- HDLC
- 512 longword FIFO (512 x 32 bit) per channel
- DMA support
- Different signal encodings (NRZ, NRZI, FM0, FM1 and Manchester)
- Multiple clock sources (for a wide bitrate spectrum)
- Front panel I/O via HD68 SCSI-3 type connector
-
TPCE001-TM
VG64 I/O Transition Module
VIEW FULL SPECIFICATIONS- Transition module for TEWS PCI and PCI Express carrier
- Connects VG64 I/O connector and 68 pin AMPMODU flat cable connector
-
TPCI270
One Slot Passive PMC Carrier
$1.00VIEW FULL SPECIFICATIONS- Cost effective solution to provide I/O in PCI environment
- Flexible I/O (TEWS offers a wide range of I/O PMCs)
- Supports one single-width 32 bit PMC
- Provides access to the PMC front I/O
- Optional provides rear I/O (P14) via VME P2 style connector
- 33 MHz PCI frequency
-
TCPS260
3U CompactPCI Serial PMC Module Carrier
VIEW FULL SPECIFICATIONS- PICMG CPCI-S.0 R2.0 compatible 3U module
- cost effective solution to provide I/O in CompactPCI Serial environment
- flexible I/O (TEWS offers a wide range of I/O PMCs)
- supports one single-width 32 bit PMC
- provides front panel I/O
- 33 MHz and 66 MHz PCI frequency
