Showing 49–60 of 276 results
-
TPMC551
8 (4) Channel of Isolated 16 bit D/A Conversion
VIEW FULL SPECIFICATIONS- Standard single-width 32 bit PMC module
- 8 or 4 D/A channels
- 16 bit D/A converter
- Channels are isolated
- Uni-polar (0 V ... +10 V) or bi-polar (±10 V) output available
- Supports simultaneous load
- Supports sequencer mode
- Channels are individually selectable
- Programmable cycle time (100 μs up to 6.5535 s)
- Reduces CPU load
- Factory calibration data available in EEPROM
- Front panel I/O (DB25 female connector) or P14 I/O
-
TPMC553
32 /16 Channels of 16 bit D/A
VIEW FULL SPECIFICATIONS- Standard single-width 32 bit PMC module
- 32 or 16 D/A channels
- 16 bit D/A converter
- Multiple software selectable output ranges (up to ±10.8 V)
- Supports simultaneous update
- Supports sequencer mode
- Channels are individually selectable
- Programmable cycle time (10 μs up to 167 s)
- Reduces CPU load
- Factory calibration data available in EEPROM
- Front panel I/O (HD68 SCSI3 type connector)
-
TPMC554
32 /16 Channels of 16 bit D/A with FIFOs
VIEW FULL SPECIFICATIONS- Standard single-width 32 bit PMC module
- 32 or 16 D/A channels
- 16 bit D/A converter
- Multiple software selectable output ranges (up to ±10.8 V)
- Supports simultaneous update
- 2 M x 16 bit SRAM to store value in advance
- Allows prestored waveforms
- Allows periodically repeated waveforms (without CPU load)
- Supports sequencer mode
- Channels are individually selectable
- Programmable cycle time (10 μs up to 11.93 h)
- Reduces CPU load
- Factory calibration data available in EEPROM
- Front panel I/O (HD68 SCSI3 type connector)
-
TPMC600
32 Interrupt generating Digital Inputs 24V
VIEW FULL SPECIFICATIONS- Standard single-width 32 bit PMC module
- 32 digital inputs (24 V)
- Defined switching points
- Programmable debounce circuit
- Input events can generate interrupts
- Galvanically isolated by optocouplers
- Groups of 4 channels share 1 common ground input
- Groups are potential free to each other
-
TPMC634
Re-Configurable FPGA with 64 TTL I/O / 32 Diff. I/O
$1.00VIEW FULL SPECIFICATIONS- Standard single-width PMC module
- User configurable FPGA (Xilinx Spartan-6)
- 64 TTL I/O lines or 32 differential I/O lines (EIA-422 / EIA485 compatible) or 32 differential I/O lines (M-LVDS) or 32 TTL I/O line and 16 differential I/O lines
- I/O direction is individually programmable
- Configurable pull voltage for TTL I/O
- On board termination resistors for differential I/O
- Auto-configurable User FPGA
- User FPGA and SPI flash are in-system programmable via PCI bus
- User FPGA JTAG port via on-board header
-
TPMC670
16 (8) Digital Inputs 24V, 16 (8) Digital Outputs 24V 0.5A
VIEW FULL SPECIFICATIONS- Standard single-width 32 bit PMC module
- 16 or 8 digital inputs (24 V)
- Defined switching points
- Programmable debounce circuit
- Input events can generate interrupts
- 16 or 8 digital high side switches (24 V / 0.5 A)
- Short-circuit protection
- Thermal overload protection
- Hardware watchdog
- All lines are galvanically isolated from system by optocouplers
- Input and switching lines are isolated in groups of 4 against each other
- Front panel I/O or P14 I/O
-
TPMC671
16 Digital Inputs 24V, 16 Digital Outputs 24V 0.5A
VIEW FULL SPECIFICATIONS- Standard single-width 32 bit PMC module
- 16 digital inputs (24 V)
- Defined switching points
- Programmable debounce circuit
- Input events can generate interrupts
- 16 digital high side or low side switches (24 V / 0.5 A)
- Short-circuit protection
- Thermal overload protection
- Hardware watchdog
- All lines are galvanically isolated from system by optocouplers
- Input lines are potential free against each other
- Switching lines are isolated in groups of 4 against each other
- Front panel I/O or P14 I/O
-
TPMC680
64 Digital Inputs/Outputs, 8x 8-bit Port
VIEW FULL SPECIFICATIONS- Standard single-width 32 bit PMC module
- 64 TTL I/O lines (8 x 8 bit ports)
- Programmable I/O direction (port wise)
- ESD and overvoltage protection
- Input events can be enabled and detected individually for each I/O line
- All 64 I/O lines are synchronously readable and writable (byte I/O mode)
- Handshake lines available in port mode
- Front panel I/O via HD68 SCSI-3 type connector
- Rear I/O via P14
-
TPMC681
64 bit TTL I/O (Bit I/O)
VIEW FULL SPECIFICATIONS- Standard single-width 32 bit PMC module
- 64 TTL I/O lines
- Programmable I/O direction (input, output, tri-state)
- Selectable pull-up voltages (+3.3 V or +5 V)
- ESD protection
- Input events can be enabled and detected individually for each I/O line
- Front panel I/O via HD68 SCSI-3 type connector
- Rear I/O via P14
-
TPMC682
Three 16 bit I/O Ports with 512 Word FIFO and Handshake
VIEW FULL SPECIFICATIONS- Standard single-width 32 bit PMC module
- 3 port 16 bit TTL I/O
- Programmable I/O direction (port wise)
- Interlocked or pulse handshake protocol
- 512 word FIFO per port
- ESD protection
- Front panel I/O via HD68 SCSI-3 type connector
- Rear I/O via P14
-
TPMC685
16 x 8 Bit Digital Inputs/Outputs (5V TTL)
VIEW FULL SPECIFICATIONS- Standard single-width 32 bit PMC module
- 128 TTL I/O lines (16 x 8 bit ports)
- Programmable I/O direction (port wise)
- ESD and overvoltage protection
- Software selectable pull-up / pull-down
- Input events can be enabled and detected individually for each I/O line
- User configurable input filter
- User configurable output watchdog
- All 128 I/O lines are synchronously readable and writable
- 2 internal timers
- Front panel I/O via HD68 SCSI-3 type connector and rear I/O via P14
-
TPMC700
32 (16) Digital Outputs 24 V / 0.5 A
VIEW FULL SPECIFICATIONS- Standard single-width 32 bit PMC module
- 32 or 16 digital high side switches (24 V / 0.5 A)
- Short-circuit protection
- Thermal overload protection
- Hardware watchdog
- All lines are galvanically isolated from system by optocouplers
- Front panel I/O or P14 I/O
