Showing 37–48 of 276 results

TPMC466

4 Channel Programmable RS232/RS422/RS485 Serial Interface
- Standard single-width 32 bit PMC module
- 4 channels with programmable RS232 / RS422 / RS485 interfaces
- High performance asynchronous serial interface (up to 5.5296 Mbps)
- Hardware handshake support available
- Half-duplex mode available
- 64 byte FIFO
- Front panel I/O (HD50 SCSI-2 type connector) and P14 I/O
VIEW FULL SPECIFICATIONS
TPMC467

4 Channel Programmable RS232/RS422/RS485 Serial Interface (RJ45)
- Standard single-width 32 bit PMC module
- 4 channels with programmable RS232 / RS422 / RS485 interfaces
- High performance asynchronous serial interface (up to 5.5296 Mbps)
- Hardware handshake support available
- Half-duplex mode available
- 64 byte FIFO
- Front panel I/O (4 RJ45 connectors) and P14 I/O
VIEW FULL SPECIFICATIONS
TPMC470

4 Channel Isolated RS232/RS422/RS485 Programmable Serial Interface
- Standard single-width 32 bit PMC module
- 4 channels with programmable RS232 / RS422 / RS485 interfaces
- channels are isolated from system and against each other
- High performance asynchronous serial interface (up to 5.5296 Mbps)
- Hardware handshake support available
- Half-duplex mode available
- 64 byte FIFO
- Front panel I/O (HD50 SCSI-2 type connector)
VIEW FULL SPECIFICATIONS
TPMC500

32 Channel Isolated 12bit A/D Conversion
- Standard single-width 32 bit PMC module
- Up to 32 single-ended or 16 differential A/D channels (multiplexed)
- 12 bit A/D converter
- Channels are galvanically isolated
- Overvoltage protected multiplexer (up to 70 Vpp)
- Programmable gain amplifier (1, 2, 4, 8 or 1, 2, 5, 10)
- Uni-polar (0 V ... +10 V) or bi-polar (±10 V) input
- Supports sequencer mode
  - Channels are individually selectable
  - Programmable cycle time (100 μs up to 6.5535 s)
  - Reduces CPU load
- Factory calibration data available in EEPROM
- Front panel I/O (HD50 SCSI-2 type connector) or P14 I/O
VIEW FULL SPECIFICATIONS
TPMC501

32 Channel of Isolated 16 bit A/D Conversion
- Standard single-width 32 bit PMC module
- Up to 32 single-ended or 16 differential A/D channels (multiplexed)
- 16 bit A/D converter
- Channels are galvanically isolated
- Overvoltage protected multiplexer (up to 70 Vpp)
- Programmable gain amplifier (1, 2, 4, 8 or 1, 2, 5, 10)
- Uni-polar (0 V ... +10 V) or bi-polar (±10 V) input
- Supports sequencer mode
  - Channels are individually selectable
  - Programmable cycle time (100 μs up to 6.5535 s)
  - Reduces CPU load
- Factory calibration data available in EEPROM
- Front panel I/O (HD50 SCSI-2 type connector) or P14 I/O
VIEW FULL SPECIFICATIONS
TPMC530

16/8 Channel Isolated Simultaneous Sampling AD/DA
- Standard single-width 32 bit PMC module
- 16 or 8 channel analog input
  - 16 bit A/D converter
  - ±5 V and ±10 V ranges
  - Sampling rate up to 200 ksps
- 8 or 4 channel analog output
  - 16 bit D/A converter
  - 0 V ... 5 V, 0 V ... +10 V, ±5 V and ±10 V ranges
  - typ. conversion time of 10 μs
- All channels are isolated
- DMA support
- Factory calibration data available in EEPROM
- external synchronization and trigger signals via P14 I/O
- Front panel I/O (HD50 SCSI-2 type connector)
VIEW FULL SPECIFICATIONS
TPMC532

16x/8x ADC, 8x/4x DAC and 14x Digital I/O
- Standard single-width PMC module
- 16 or 8 channel analog input
  - True differential
  - 16 bit A/D converter
  - Simultaneous sampling
  - ±5 V and ±10 V ranges
  - Sampling rate up to 200 ksps
  - Oversampling capability with digital filter
  - Sequencer mode available
- 8 or 4 channel analog output
  - Single-ended
  - 16 bit D/A converter
  - Simultaneous update
  - 0 V ... 5 V, 0 V ... +10 V, 0 V ... +10.8 V, ±5 V, ±10 V and ±10.8 V ranges
  - Typ. settling time of 10 μs
  - Sequencer mode available
- 14 channel digital I/O
  - Tri-state 5 V-tolerant TTL
  - Pull resistors to 3.3 V, 5 V, GND and floating
  - Input event detection
- DMA support
- Factory calibration data available in EEPROM
- Analog I/O hardware correction function available
- external synchronization via digital I/O lines and trigger signals via P14 I/O
- Front panel I/O (Mini D Ribbon (MDR68) type connector)
VIEW FULL SPECIFICATIONS
TPMC533

32x ADC, 16x/0x DAC and 8x Digital I/O
- Standard single-width PMC module
- 32 channel analog input
  - True differential
  - 16 bit A/D converter
  - Simultaneous sampling
  - ±5 V and ±10 V ranges
  - Sampling rate up to 200 ksps
  - Oversampling capability with digital filter
  - Sequencer mode available
- 16 channel analog output (optional)
  - Single-ended
  - 16 bit D/A converter
  - Simultaneous update
  - 0 V ... 5 V, 0 V ... +10 V, 0 V ... +10.8 V, ±5 V, ±10 V and ±10.8 V ranges
  - Typ. settling time of 10 μs
  - Sequencer mode available
- 8 channel digital I/O
  - Tri-state 5 V-tolerant TTL
  - Pull resistors to 3.3 V, 5 V, GND and floating
  - Input event detection
- DMA support
- Factory calibration data available in EEPROM
- Analog I/O hardware correction function available
- external synchronization via digital I/O lines and trigger signals via P14 I/O
- Front panel I/O (HDRA100 type connector)
VIEW FULL SPECIFICATIONS
TPMC541

32/16 Single-Ended or 16/8 Differential A/D Channels, 8/4 Voltage & Current Range D/A Channels and 8 LVTTL/TTL Digital I/O Channels
- Standard single-width PMC module
- up to 32 (single-ended) or 16 (differential) channel analog input
  - 16 bit A/D converter
  - Nearly simultaneous sampling
  - multiple analog input ranges (up to ±24.576 V)
  - Sequencer mode available
- 8 channel analog output
  - Single-ended
  - 16 bit D/A converter
  - Simultaneous update
  - 0 V ... 5 V, 0 V ... +6 V, 0 V ... +10 V and 0 V ... +12 V unipolar voltage ranges
  - ±5 V, ±6 V, ±10 V and ±12 V bipolar voltage ranges
  - 0 mA ... 20 mA, 4 mA ... 20 mA, and 4 mA ... 24 mA current ranges
  - Sequencer mode available
- 8 channel digital I/O
  - Tri-state 5 V-tolerant LVTTL/TTL
  - Pull resistors to 3.3 V, 5 V, GND
- DMA support
- Factory calibration data available in EEPROM
- Analog I/O hardware correction function available
- external synchronization trigger signals via P14 I/O
- Front panel I/O (Mini D Ribbon (MDR68) type connector)
VIEW FULL SPECIFICATIONS
TPMC542

16/8 Channel Voltage & Current Range D/A and 20 Channel LVTTL/TTL Digital I/O
- Standard single-width PMC module
- 16 or 8 channel analog output
  - Single-ended
  - 16 bit D/A converter
  - Simultaneous update
  - 0 V ... 5 V and 0 V ... +10 V unipolar voltage ranges
  - ±5 V and ±10 V bipolar voltage ranges
  - 20% overrange possible for all voltage ranges
  - 0 mA ... 20 mA, 0 mA ... 24 mA and 4 mA ... 20 mA current ranges
  - 20% over-range possible for all ranges
  - Sequencer mode available
  - Factory calibration data available in EEPROM
  - hardware correction function available
  - DMA support
- 20 channel digital I/O
  - Tri-state 5 V-tolerant LVTTL/TTL
  - Pull resistors to 3.3 V, 5 V, GND
  - Input event detection
  - Input debounce filter
- external synchronization trigger signals via P14 I/O
- Front panel I/O (Mini D Ribbon (MDR68) type connector)
VIEW FULL SPECIFICATIONS
TPMC543

Analog Current & High-Voltage Input Channels, Analog Voltage/Current Output Channels and Digital LVTTL/TTL I/O Channels
- Standard single-width PMC module
- 8 differential bipolar analog current input channels
- 16 (single-ended) or 8 (differential) bipolar analog high-voltage input channels
- 8 analog output channels (single-ended, simultaneous update, bipolar & unipolar ranges)
- 8 ESD protected digital LVTTL/TTL I/O channels
- AD/DA DMA support
- AD/DA Factory calibration data available via EEPROM
- AD/DA Analog I/O hardware correction function available
- External synchronization option via P14 I/O
VIEW FULL SPECIFICATIONS
TPMC550

8 (4) Channel of Isolated 12 bit D/A Conversion
- Standard single-width 32 bit PMC module
- 8 or 4 D/A channels
- 12 bit D/A converter
- Channels are isolated
- Uni-polar (0 V ... +10 V) or bi-polar (±10 V) output available
- Supports simultaneous load
- Supports sequencer mode
  - Channels are individually selectable
  - Programmable cycle time (100 μs up to 6.5535 s)
  - Reduces CPU load
- Factory calibration data available in EEPROM
- Front panel I/O (DB25 female connector) or P14 I/O
VIEW FULL SPECIFICATIONS

TPMC466

TPMC467

TPMC470

TPMC500

TPMC501

TPMC530

TPMC532

TPMC533

TPMC541

TPMC542

TPMC543

TPMC550