Showing all 4 results
-
TMPE623
Reconfigurable FPGA with Digital I/O PCIe Mini Card
- Standard PCI Express Mini Card
- User programmable FPGA (AMD Artix™ 7)
- 26 TTL lines (5 V-tolerant) or 13 differential I/O lines (EIA-422 / EIA-485 compatible) or 13 differential Multipoint-LVDS lines
- ESD-protected I/O lines
- Each I/O line is individually configurable (e.g. direction)
- 3 state TTL output (high, low, and tristate)
- 3 TTL pull voltages (GND, 3.3 V, and 5 V)
- Onboard termination for differential I/O lines
- Provides a basic heatsink to facilitate thermal management
-
TMPE627
Reconfigurable FPGA with AD/DA & Digital I/O PCIe Mini Card
- Standard PCI Express Mini Card
- User programmable FPGA (AMD Artix ™ 7)
- 14 TTL lines
- 5 V-tolerant
- ESD-protected I/O lines
- Each I/O line is individually configurable (e.g. direction)
- 3 output state (high, low, and tristate)
- 3 pull voltages (GND, 3.3 V, and 5 V)
- 4 channels 16 bit ADC
- Offering single-ended and differential mode
- 7 individually selectable voltage input ranges (up to ±10.24 V)
- Sampling rate up to 200 ksps
- 4 channels 16 bit DAC
- 4 individually selectable voltage output ranges (up to ±10.8 V)
- 10 μs conversion time
- Factory calibration data for ADC and DAC is available
- Provides a basic heatsink to facilitate thermal management
-
TMPE863
3 Channel High Speed Sync/Async Serial Interface
- Standard PCI Express Mini Card
- 3 channels high speed serial data communication
- Differential I/O lines for EIA-422, EIA-485 Full-Duplex
- Several communication protocols
- asynchronous (with oversampling)
- isochronous
- HDLC
- 512 longword FIFO (512 x 32 bit) per channel
- DMA support
- Different signal encodings (NRZ, NRZI, FM0, FM1 and Manchester)
- Multiple clock sources (for a wide bitrate spectrum)
- 30 pin Pico-Clasp latching connector
- Provides a basic heatsink to facilitate thermal management
-
TMPE633
Reconfigurable FPGA with Digital I/O PCIe Mini Card
- Standard PCI Express Mini Card
- User programmable FPGA (AMD Spartan ™ 6)
- 26 TTL lines (5 V-tolerant) or 13 differential I/O lines (EIA-422 / EIA-485 compatible) or 13 differential Multipoint-LVDS lines
- ESD-protected I/O lines
- Each I/O line is individually configurable (e.g. direction)
- 3 state TTL output (high, low, and tristate)
- 3 TTL pull voltages (GND, 3.3 V, and 5 V)
- Onboard termination for differential I/O lines