TCP001-TM

Transition Module for 6U CPCI IP carrier; RJ4 and RJ5 connectors mapped to four 50 pin ribbon cable connectors for rack internal wiring; no front panel; Operating temperature -40°C to +85°C

[MORE]
TCP002-TM

Transition Module for 6U CPCI IP carrier; RJ4 and RJ5 connectors mapped to four HD50 SCSI-2 type connectors in EMI front panel; Operating temperature -40°C to +85°C

[MORE]
TCP010-TM

Transition Module for 3U CPCI IP carrier; RJ2 connector mapped to two 50 pin ribbon cable connectors for rack internal wiring; no front panel; Operating temperature -40°C to +85°C

[MORE]
TCP011-TM

Transition Module for 3U CPCI IP carrier; RJ2 connector mapped to two 50 pin ribbon cable connectors (stacked version) in EMI front panel; Operating temperature -40°C to +85°C

[MORE]
TCP012-TM

Transition Module for 3U CPCI IP carrier; RJ2 connector mapped to two 50 pin CHAMP connectors in EMI front panel; Operating temperature -40°C to +85°C

[MORE]
TCP201

6U/4TE CompactPCI carrier for 4 IndustryPack; Self healing fuses and RF-filters on power lines of each IndustryPack slot; IP I/O on four HD50 SCSI-2 type connectors in EMI front panel; 8/32 MHz IP interface; No DMA; Status LED in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

[MORE]
TCP211

3U/4TE CompactPCI carrier for 2 IndustryPack; Self healing fuses and RF-filters on power lines of each IndustryPack slot; IP I/O on two 50 pin ribbon cable connectors (stacked version) in front panel; 8/32 MHz IP interface; No DMA; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

[MORE]
TCP212

3U/4TE CompactPCI carrier for 2 IndustryPack; Self healing fuses and RF-filters on power lines of each IndustryPack slot; IP I/O on two 50 pin CHAMP connectors in EMI front panel; 8/32 MHz IP interface; No DMA; Status LED in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

[MORE]
TCP213

3U/4TE CompactPCI carrier for 2 IndustryPack; Self healing fuses and RF-filters on power lines of each IndustryPack slot; IP I/O on CompactPCI connector J2; 8/32 MHz IP interface; No DMA; Status LED in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

[MORE]
TCP220

6U/4TE CompactPCI carrier for 4 IndustryPack; Self healing fuses and RF-filters on power lines of each IndustryPack slot; IP I/O on CompactPCI connector J4 and J5; 8/32 MHz IP interface; No DMA; Status LED in EMI front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

[MORE]
TCP260

6U/4TE CompactPCI carrier for 2 PMC modules; Standard PMC front I/O and rear I/O on J3/J5; Pericom PI7C8154A/B PCI bridge; Hot swap capability; 3.3 or 5V PMC I/O signaling voltage; PCI I/O signaling voltage 3.3V and 5V; Operating temperature 0°C to +70°C or -40°C to +85°C

[MORE]
TCP261

6U/4TE CompactPCI carrier for 2 PMC modules; Standard PMC front I/O and rear I/O on J3/J4; Pericom PI7C8154A/B PCI bridge; Hot swap capability; 3.3V or 5V PMC I/O signaling voltage; PCI I/O signaling voltage 3.3V and 5V; Operating temperature 0°C to +70°C or -40°C to +85°C

[MORE]
TCP630

Standard 3U 32 bit CompactPCI module conforming to PICMG 2.0 R3.0; User configurable Xilinx FPGA; Flash device in-system programmable; 32 bit PCI target interface by PLX PCI9030; FPGA clock options: Local clock oscillator / PLL programmable clock generator (200 KHz - 166 MHz), 6 clock outputs connected to FPGA; I/O lines: 64 TTL I/O or 32 differential I/O or 32 TTL I/O and 16 differential I/O ; TTL signaling voltage (maximum current: +/-24 mA) or EIA-422/-485 signaling level / direction individually programmable; I/O access: 64 I/O lines via a PIM Module, parallel to up to 64 I/O lines on rear connector J2; Operating temperature: -40°C to +85°C

[MORE]
TCP631

32 bit PCI bus mastering interface by PLX PCI9056 connected to user configurable Xilinx XC3S1500-4 Spartan-III; FPGA development tool: Free Xilinx ISE WebPack; FPGA configuration by in system programmable FlashProm via PCI bus; FPGA clock options: Local clock oscillator / PLL programmable clock generator (5 KHz - 200 MHz); 2x 128 Mbytes DDR2 RAM; I/O access: 64 ESD protected I/O lines via PIM Module slot allowing flexible I/O solutions; PCI I/O signaling voltage 3.3V and 5V; Operating temperature: -40°C to +85°C

[MORE]
TCP862

Four high speed synchronous/asynchronous serial interfaces based on Infineon PEF20534; I/O access: HD68 front connector, parallel to rear connector J2; Physical interface (individually programmable per channel): EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; Maximum data rate: 10 Mbit/s (synchronous), 2 Mbit/s (asynchronous), EIA-232 up to 115.2 kbit/s; Internal or external provided clock; Temperature range -40°C to +85°C

[MORE]
TCP866

3U 32Bit CompactPCI module conforming to PICMG 2.0 R3.0 ; PCI 2.2 compliant interface; 8 channel high performance asynchronous serial interface; Support of RxD, TxD, RTS, CTS and GND or RxD+/-, TxD+/-; Programmable baud rates up to 921.6kbaud; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel; ESD protected transceiver (up to +/- 15KV according to IEC 1000-4-2); front panel I/O on HD50 SCSI-2 type connector or Back I/O (J2); PCI I/O signaling voltage 3.3V and 5V, Operating temperature -40°C to +85°C

[MORE]
TCP872

cPCI Carrier for two PC Card / CardBus Cards sockets with hot insertion and removal, supports up to two memory and I/O cards of type I and II or one card of type III (3.3V and 5V card power supply supported, 3.3V, 5V and 12V card programming voltage supported, Short circuit protection); Status LED's; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

[MORE]