The TPMC866-TM are transition modules for the serial interface TPMC866 (versions with front panel access).
The TPMC866-TM-10R supports all versions of the TPMC866.
Eigth DB25 female connectors are mounted in a 6U 8TE EMV front panel.
The transition module supports TXD, RXD, RTS, CTS and GND for each of the eight serial channels of the TPMC866-10R (RS232).
TxD+/-, RxD+/-, GND are supported for the TPMC86611R/12R (RS422) and Dx+/-, GND for the TPMC866-12R (RS485).
Each serial channel can be configured by jumper as DTE or DCE.
On board termination is provided for RS422/RS485. Termination can be activated by jumper.
A 2 pin terminal block on the transition module can be used to provide +5V to each of the eight DB25 connectors (pin 9) and to supply the on board termination for RS422/ RS485. Support of the +5V is selectable by jumper for each serial channel. The +5V is fuse protected by a 1A multi-fuse.
The TPMC866-TM-20R supports all versions of the TPMC866.
Eight DB25 female connectors are mounted in a 6U 8TE EMV front panel.
Eight shielded RJ45 connectors are mounted in a 6U 4TE EMV front panel.
The transition module supports TXD, RXD, RTS, CTS and GND for each of the eight channels of the TPMC866-10R (RS232).
TxD+/-, RxD+/-, GND are supported for the TPMC86611R/12R (RS422) and Dx+/-, GND for the TPMC866-12R (RS485).
Each serial channel can be configured by jumper as DTE or DCE.
On board termination is provided for RS422/RS485. Termination can be activated by jumper.
A 2 pin terminal block on the transition module can be used to provide +5V to the RJ45 connectors (pin 1) of channel 3 to 8 and to supply the on board termination for RS422/ RS485. Support of the +5V is selectable by jumper. The +5V is fuse protected by a 1A multi-fuse.
The TPMC866-TM-30R supports the TPMC866-10R (RS232 interface) and the TPMC866-12R (RS485 HD configuration only).
Up to two modules can be connected to one transition module TPMC866-TM-30R.
Sixteen 4 pin RJH connectors are mounted in a 6U 4TE EMV front panel.
The transition module supports TXD, RXD, GND for each set of the eight channels of the TPMC866-10R (RS232) and Dx+/-, GND for the TPMC866-12R (RS485 HD configuration).
On board termination is provided for RS485. Termination can be activated by jumper.
A two pin screw terminal (X9) can be used to supply the on board termination for RS485