TPMC821

Local MC68332 running the original Generation 4 INTERBUS firmware of PHOENIX; Supports up to 512 I/O modules with up to 4096 I/O points and up to 62 PCP devices; G4 Phoenix Contact Firmware (4.66); PCI I/O signaling voltage 3.3V and 5V; Operating temperature 0°C to +70°C

[MORE]
TPMC866

8 channels of high performance RS232 / RS422 / RS485 serial interface; Programmable baud rates up to 460.8kbaud; 64 (128) byte receive FIFO and 64 (128) byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0°C to +70°C (TPMC866-10x/-11x/-12x) and -40°C to +85°C (TPMC866-xx-ET)

[MORE]
TPMC866-IO-10

DIN Rail Mounting I/O module, 95 mm x 83 mm: 8 DB9 male connectors; Terminal point for shield of all DB9 connectors; Supports front panel I/O versions of the TPMC866; Cable TA105 (0.8m ribbon cable with 50 pin ribbon cable connector and 50 pin SCSI-2 male connector) is included

[MORE]
TPMC866-TM-10

6U / 8TE EMV front panel; 8 DB25 female connectors mounted in front panel; Supports front panel I/O versions of the TPMC866; DTE and DCE configuration by jumper fields; RS422 and RS485 termination selectable by jumper; +5V / GND by 2 pin terminal block; Power only required to supply on board termination or to provide +5V to pin 9 of the DB25 connectors of channel 1 to 8; Fuse protected by a 1A multi-fuse; Cable TA105-10, (0.8m ribbon cable with 50 pin ribbon cable connector and 50 pin SCSI-2 male connector) is included

[MORE]
TPMC866-TM-20

6U / 4TE EMV front panel; 8 shielded RJ45 mounted in front panel; Supports front panel I/O versions of the TPMC866; DTE and DCE configuration by jumper fields; RS422 and RS485 termination selectable by jumper; +5V / GND by 2 pin terminal block; Power only required to supply on board termination or to provide +5V to pin 1 of RJ45 connectors of channel 3 to 8; Fuse protected by a 1A multi-fuse; Cable TA105 (0.8m ribbon cable with 50 pin ribbon cable connector and 50 pin SCSI-2 male connector) is included

[MORE]
TPMC866-TM-30

6U / 4TE EMV front panel; Sixteen 4pin RJH connectors mounted in front panel; Supports front panel I/O versions of the TPMC866-10/12; RS485 termination selectable by jumper; +5V / GND by 2 pin terminal block; Power only required to supply on board termination; Fuse protected by a 1A multi-fuse; Two TA105 0.8m ribbon cables with 50 pin ribbon cable connector and 50 pin SCSI-2 male connector, are included

[MORE]