TIP001-TM

Transition Module providing all 50 IP I/O lines on a plugable screw terminal at the 6U front panel; Cable TA106-10 (0.8m ribbon cable with 50 pin ribbon cable connectors) is included

[MORE]
TIP866-IO-10

DIN Rail Mounting I/O module, 95 mm x 83 mm; 8 DB9 male connectors; Terminal point for shield of all 8 DB9 connectors; Supports all versions of the TIP866, TIP867 and IP-Octal; Cable TA106-10 (0.8m ribbon cable with 50 pin ribbon cable connectors) is included

[MORE]
TIP866-TM-10

6U / 8TE EMV front panel; 8 DB25 female connectors mounted in front panel; Supports all versions of the TIP866, TIP867 and IP-Octal; DTE and DCE configuration by jumper fields; RS422 and RS485 termination selectable by jumper; +5V / GND by 2 pin terminal block; Power only required to supply on board termination or to provide +5V to pin 9 of the DB25 connectors of channel 1 to 8; Fuse protected by a 1A multi-fuse; Cable TA106 (0.8m ribbon cable with 50 pin ribbon cable connectors) is included

[MORE]
TIP866-TM-20

6U / 4TE EMV front panel; 8 shielded RJ45 connectors mounted in front panel; Supports all versions of the TIP866, TIP867 and IP-Octal; DTE and DCE configuration by jumper fields; RS422 and RS485 termination selectable by jumper; +5V / GND by 2 pin terminal block; Power only required to supply on board termination or to provide +5V to pin 1 of RJ45 connectors of channel 3 to 8; Fuse protected by a 1A multi-fuse; Cable TA106 (0.8m ribbon cable with 50 pin ribbon cable connectors) is included

[MORE]
TIP866-TM-30

6U / 4TE EMV front panel; Sixteen 4pin RJH connectors mounted in front panel; Supports TIP866-10x/11x, TIP867 and IP Octal; RS485 termination selectable by jumper; +5V / GND by 2 pin terminal block; Power only required to supply on board termination ; Fuse protected by a 1A multi-fuse; Two TA106 (0.8m ribbon cables with 50 pin ribbon cable connectors) are included

[MORE]