TPMC118

6 counter (1x, 2x, 4x; 32 bit counter with preload and output register; Auto reference feature); 6 isolated encoder input circuits (TTL / RS422) supplied by on board DC/DC converter; 6 DAC 16 bit, +/- 10V output; 6 isolated 24V inputs (reference switch or general purpose); all signals on HD68 SCSI-3 type connector in front panel; Operating temperature 0°C to +70°C

[MORE]
TPMC362

Four high speed synchronous/asynchronous serial interfaces based on Infineon PEF20534; I/O access on rear connector P14; Physical interface (individually programmable per channel): EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; Maximum data rate: 10 Mbit/s (synchronous), 2 Mbit/s (asynchronous), internal or external provided clock; EIA-232: up to 115.2 kbit/s; Temperature range: -40°C to +85°C

[MORE]
TPMC382

Conduction Cooled PMC; 4 channel Fast Ethernet interface; Each channel based on Intel 82551 Ethernet Controller providing 10/100BaseT on rear I/O via P14 connector; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

[MORE]
TPMC630

User configurable Xilinx FPGA with 300,000 (TPMC630-1x) or 600,000 (TPMC630-2x) system gates; Flash device in-system programmable; 32 bit PCI target interface by PLX PCI9030; FPGA clock options: Local clock oscillator / PLL programmable clock generator (200 KHz - 166 MHz), 6 clock outputs connected to FPGA; I/O lines: 64 TTL I/O (TPMC630-x0x), 32 differential I/O (TPMC630-x1x) or 32 TTL I/O and 16 differential I/O (TPMC630-x2x) / TTL signaling voltage (maximum current: +/-24 mA) or EIA-422/-485 signaling level / direction individually programmable; I/O access: 64 I/O lines on HD68 front connector, parallel to up to 64 I/O lines on rear connector P14; Operating temperature: -40°C to +85°C

[MORE]
TPMC812

SERCOS bus interface using the SERCON816 controller chip (SERCON410B Compatible Mode only); RS485 interface and fiber optic interface; Two encoder inputs (optically isolated) for hand wheel support; Optical transmitter, receiver and DB15 connector mounted in front panel; Operating temperature -40°C to +85°C

[MORE]
TPMC813

LON bus interface based on Neuron Chip 3150; 4 kbytes Dual Port RAM; 32 Kbytes EPROM for protocol firmware and application; RS485, transformer coupled 1.25Mbit or 78kbit interface, free topology twisted pair interface based on FTT-10A; Includes MIP/DPR license; Operating temperature -40°C to +85°C

[MORE]
TPMC862

Four high speed synchronous/asynchronous serial interfaces based on Infineon PEF20534; I/O access: HD68 front connector, parallel to rear connector P14; Physical interface (individually programmable per channel): EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; Maximum data rate: 10 Mbit/s (synchronous), 2 Mbit/s (asynchronous), internal or external provided clock; EIA-232 up to 115.2 kbit/s; Temperature range -40°C to +85°C

[MORE]
TPMC868

16 channels of high performance RS232 / RS422 serial interface; Programmable baud rates up to 460.8kbaud; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0°C to +70°C (TPMC868-10x/-11x) and -40°C to +85°C (TPMC868-xx-ET)

[MORE]
TPMC872 component side

Up to two PC Card / CardBus Sockets with hot insertion and removal, supports memory and I/O cards of type I, II and III (second socket only); PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

[MORE]
TPMC880

Ethernet interface based on Intel 21143 Controller. Provides 10/100BaseT on RJ45 connector as well as 10Base2 on BNC connector. Both connectors and status LEDs mounted in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature 0°C to +70°C

[MORE]
TPMC881

Ethernet interface based on Intel 82551ER/8255IT Controller; Provides 10Base-T/100BaseTx, half or full-duplex; 3Kbyte transmit and receive FIFOs; Network connection via RJ45 connector or P14 I/O; Status LEDs; Controller supports DMA cycles as bus master; PCI I/O signaling voltage 3.3V and 5V; Operating temperature 0°C to +70°C (TPMC881-10x/-11x) and -40°C to +85°C (TPMC881-xx-ET)

[MORE]
TPMC882

Ethernet interface based on Intel 82551IT Controller; IEEE802.3 compliant LAN interface; Provides 10BASE-T/100BASE-TX interface, half or full-duplex; 3Kbyte Transmit and Receive FIFOs; Network connection via 4x RJ45 connector; Status LEDs; Controller supports DMA cycles as bus master; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

[MORE]
TPMC884

Dual Ethernet interface based on Intel 82546GB Controller; Two IEEE802.3 compliant Gigabit LAN interface; Provides 10/100/1000 Mbit/s, half or full-duplex; 64Kbyte transmit and receive FIFOs; Network connection via RJ45 connector; Status LEDs; Controller supports DMA cycles as bus master; PCI I/O signaling voltage 3.3V and 5V; Operating temperature 0°C to +55°C

[MORE]