MORE THAN 40 YEARS OF EXPERIENCE
Customer first approach
Using this customer first approach, TEWS has developed a large number of standard and custom products for applications in industrial control, telecommunication infrastructure, medical equipment, traffic control and COTS. TEWS line of embedded I/O solutions is available worldwide through a global network of distributors.
Featured Products
TPMC151
4 Channel Resolver/LVDT-to-Digital Converter
- Standard single-width 32 bit PMC module
- 4 channels Resolver or LVDT/RVDT-to-digital converter, option for 2 synchro channels available
- 16 bit resolution
- 0-12 VRMS programmable input
- 0-12 VRMS, 1-20 kHz programmable excitation
- Tracking rate up to ¼ excitation frequency
- Angle and velocity output
- Front panel I/O (50-pin MDR type connector)
TXMC397
Conduction Cooled, 2 Channel 10GBASE-T Ethernet
- Conduction Cooled single-width XMC module
- 2 channel 10GBASE-T / NBASE-T / 1000BASE-T / 100BASE-TX
- IPMI resource: FRU hardware definition information stored in on-board EEPROM
- PXE and iSCSI boot (64 Mbit serial flash)
- IEEE 1588/802.1AS Precision Time Protocol (PTP)
- Rear I/O via P16 – Both channels mapped in X12d range or both channels mapped in X8d range (VITA46.9)
TXMC639
Reconfigurable FPGA with 16x Analog Input 8x Analog Output and 32x Digital I/O
- Standard XMC Module
- User configurable FPGA (AMD Kintex™ 7)
- DDR3 SDRAM bank, 256M x 32 bit (1 GB)
- Up to 16 channels differential analog input
- 16 bit resolution
- Programmable input voltage
- Sampling rate up to 1.5 Msps
- Up to 8 channels single-ended analog output
- 16 bit resolution
- Programmable output voltage: ±10 V, ±5.0 V or ±2.5 V
- Full scale settling time: typ.1 µs
- 32 digital TTL compatible I/O lines
- 16 lines optional configurable as differential RS422 interface
- P14/P16 Rear I/O lines
- 64 single ended or 32 differential rear I/O lines on a rear XMC 64 pin P14 connector
- 4 FPGA Multi-Gigabit-Transceiver on a rear XMC P16 connector
TXMC897
2 Channel 10GBASE-T and 2 Channel SFP+ 10 Gigabit Ethernet
- Short single-width XMC module
- 2 channel 10GBASE-T / NBASE-T / 1000BASE-T / 100BASE-TX and 2 channel SFP+ 10 Gigabit
- IPMI resource: FRU hardware definition information stored in on-board EEPROM
- PXE and iSCSI boot (64 Mbit serial flash)
- IEEE 1588/802.1AS Precision Time Protocol (PTP)
- Front I/O via 2 RJ45 connectors and 2 SFP+ connectors
TXMC637
Reconfigurable FPGA with 16x Analog Input 8x Analog Output and 32x Digital I/O
- Standard XMC Module
- User configurable FPGA (AMD Artix™ 7)
- DDR3 SDRAM bank, 256M x 16 bit (512 MB)
- 32 channels 16 bit ADC
- Offering single-ended and differential mode
- Programmable input voltage
- Conversion time: up to 1.1 µs
- Sampling rate up to 1 Msps
- 8 channels single-ended analog output
- 16 bit resolution
- Programmable output voltage: ±10 V, ±5.0 V or ±2.5 V
- Full scale settling time: typ.1 µs
- 32 digital TTL compatible I/O lines
- 16 lines optional configurable as differential RS422 interface
- P14/P16 Rear I/O lines
- 64 single ended or 32 differential rear I/O lines on a rear XMC 64 pin P14 connector
- 4 FPGA Multi-Gigabit-Transceiver on a rear XMC P16 connector
TPMC543
Analog Current & High-Voltage Input Channels, Analog Voltage/Current Output Channels and Digital LVTTL/TTL I/O Channels
- Standard single-width PMC module
- 8 differential bipolar analog current input channels
- 16 (single-ended) or 8 (differential) bipolar analog high-voltage input channels
- 8 analog output channels (single-ended, simultaneous update, bipolar & unipolar ranges)
- 8 ESD protected digital LVTTL/TTL I/O channels
- AD/DA DMA support
- AD/DA Factory calibration data available via EEPROM
- AD/DA Analog I/O hardware correction function available
- External synchronization option via P14 I/O
TPMC321
Conduction cooled 64 Digital TTL I/O / 32 Differential I/O
- Conduction cooled single-width 32 bit PMC module
- 64 Bit I/O – TTL signaling voltage level or 32 Differential Bit I/O – EIA-485 or 32 Differential Bit I/O – M-LVDS
- ESD protection
- Rear-IO via P14
- Individually programmable I/O lines (direction, pullup/pulldown)
- Input events can generated interrupts individually for each channel
TXMC590
16 Channel Thermo-/Strain-Measurement XMC
- Standard Single width XMC module
- 16 independent measurement channels
- Differential analog input
- Differential sensor excitation output
- Each channel is seperately configurable
- Supports thermocouple measurements
- Supported cold junction temperature sensors
- A second channel
- An onboard I2C temperature sensor
- An external I2C temperature sensor
- Supports measurement by resistive sensors and thermistors
- Supports strain gauges
- Quarter-, half- and full bridges are supported
- Front panel I/O (3M Mini D Ribbon connector, 68 pol.)
Latest News
TEWS Technologies Partners with HAWKS Racing Formula Student Team
We are thrilled to announce that TEWS Technologies is now an official sponsor of the HAWKS Formula Student team from the University of Applied Sciences Hamburg (HAW Hamburg). This collaboration underscores our commitment to fostering innovation, supporting young engineering talent, and advancing cutting-edge technology.
TEWS Technologies Introduces TPMC151: Advanced 4-Channel Resolver/LVDT/RVDT-to-Digital Converter PMC Module
TPMC151 adds cost-effective Resolver or LVDT/RVDT-to-Digital PMC based on an FPGA design for flexibility, high-reliability, and long-life cycle for advanced and high-demanding motion control applications. Key Features of the TPMC151 TEWS Technologies, a leading provider of embedded I/O solutions, is proud to announce the launch of the TPMC151, a versatile 4-channel Resolver or LVDT/RVDT-to-Digital Converter […]
Location Campaing for the District of Pinneberg
We have been invited to participate in the district of Pinneberg’s new location campaign by Kreis Pinneberg Wirtschaft. The campaign aims to showcase the region’s full potential and provides some insights into several local businesses. We are participating as campaign ambassadors and are proud to call the district of Pinneberg our home for our entire […]
Conduction Cooled XMC Card for Enhanced Ethernet Connectivity in Demanding Applications
TEWS Technologies, renowned for its expertise in designing and building turnkey, embedded interface solutions, launched its latest product, the COTS TXMC397 Conduction Cooled Switched Mezzanine Card (CCXMC)-compatible module. The TXMC397 is an innovative addition to the company’s portfolio, offering high-speed Ethernet connectivity for a variety of demanding applications.
TEWS Technologies Adds Higher Performance Advanced FPGA to Enhance Existing Range of Digital and Analog XMC Modules
TEWS Technologies, a leader in designing and building turn-key, embedded interface solutions, adds more performance and flexibility with its latest innovative FPGA solution on XMC modules, the TXMC639. A standard single-width Switched Mezzanine Card (XMC) compatible module, it adds higher performance and flexibility to the current XMC line for digital and analog applications.
TEWS Technologies Launches TXMC897 Switched Mezzanine Card for Enhanced Ethernet Connectivity
TEWS Technologies, renowned for its expertise in designing and building turnkey, embedded interface solutions, launched its latest product, the TXMC897 Switched Mezzanine Card (XMC)-compatible module. The TXMC897 is an innovative addition to the company’s portfolio, offering high-speed Ethernet connectivity for a variety of applications.